MONTECORSE
MonteCorse is the EVO Corse wheel created for those who want to bring the identity of the legendary Lancia Delta back to their vehicle. Its design faithfully recalls the original magnesium wheel, reinterpreted in A356-T6 aluminium alloy to offer a solution suited to current usage requirements.
The current version has been optimised to reduce wheel mass while retaining the proportions, design and character of the original model. MonteCorse therefore combines an aesthetic closely connected to rally history with technical configurations to be defined according to the vehicle, tyre and braking system.
A historic design, a current configuration
MonteCorse can accommodate the original Abarth centre cap. Steel inserts are included to provide precise fastening, while the fitting kit uses bolts that are longer than the original ones.
The choice of size, ET, PCD, centre bore and fastening system must be made according to the vehicle’s specific configuration.
AVAILABLE SIZES
MonteCorse 7×17″
The 7×17″ size is dedicated to configurations requiring a more compact width and a wide choice of ET values.
| Size | ET | PCD | Weight |
|---|---|---|---|
| 7×17″ | from 4 to 45 | from 98 to 130 | from 10.4 to 11.5 kg |
MonteCorse 8×17″
The 8×17″ size increases wheel width for configurations requiring larger-section tyres.
| Size | ET | PCD | Weight |
|---|---|---|---|
| 8×17″ | from 17 to 58 | from 98 to 130 | from 11.2 to 11.9 kg |
MonteCorse 8×18″
The 8×18″ size allows the use of a larger diameter while retaining the MonteCorse design in a configuration dedicated to road and tarmac rally use.
| Size | ET | PCD | Weight |
|---|---|---|---|
| 8×18″ | from 20 to 50 | from 98 to 130 | from 10.9 to 11.5 kg |
Steel inserts and fitting kit
MonteCorse is fitted with steel inserts. The 7×17″ and 8×17″ sizes are available with 60° tapered or flat seats; the 8×18″ size uses 60° tapered inserts.
The fitting kit consists of bolts that are longer than the original ones. Compatibility of the original Abarth centre cap, fitting kit and fastening system must be verified according to the vehicle and wheel configuration.
Materials, finishes and configurations
MonteCorse is made from A356-T6 aluminium alloy.
Standard colours are white and matt black. Silver, gold, anthracite, matt bronze, glossy bronze and glossy black are also available.
Applications and compatibility check
MonteCorse must be configured according to the specifications of each individual vehicle. Before ordering, it is necessary to verify the vehicle year and version, wheel size, PCD, ET, centre-bore diameter, centre cap, fastening system, available brake clearance, tyre and applicable approval requirements.
The sizes, weights and configurations shown may vary according to the specific wheel specification. To identify the correct configuration, contact the EVO Corse team or use the configurator.
Abarth: 500
Alfa Romeo: 145, 146, 147, 155, 156, GT, GTV, MiTo, Spider
Audi: A3, RS3, TTS
Dacia: Sandero / Stepway
Fiat: Barchetta, Bravo, Punto, Tipo
Ford: Escort, Escort Cosworth, Escort GrA, Fiesta, Focus, Sierra, Sierra RS Cosworth
Honda: Civic
Hyundai: Coupé, i20 N, i30 / i30N
Kia: Cee’d
Lancia: Delta, Delta GrA, Ypsilon
Mazda: 3, 323F
Mercedes: Classe A
Mini: Clubman, Cooper and S, Countryman, John Cooper Works & Cabrio
Mitsubishi: ASX, Lancer
Nissan: Micra
Peugeot: 308
Renault: Clio, Megane, Megane N4 (Rally), Twingo
Seat: Arona, Ibiza, Leon / Leon Cupra, Leon Cupra R, Toledo
Skoda: Fabia, Octavia
Smart: Forfour
Subaru: BRZ, Impreza, Impreza STI, Impreza WRX/STi GrN (Rally)
Toyota: GR Yaris, GT 86
Volkswagen: Beetle, Eos, Golf, Jetta, New Beetle, New Beetle Cabrio, New Scirocco, Polo